Fix Your Stuff Community Store

Aiptek DZO-V58N Lens Protector Replacement

Introduction

The lens protector is a plastic cover that protects the lens from scratches, dirt and other debris. Use this guide to replace the lens protector.

What you need

  1. Aiptek DZO-V58N Lens Protector Replacement, Battery: step 1, image 1 of 1

    • Locate the battery compartment on the back of the camera. It is the panel with the plastic ridges for simple removal.

    • Slide the battery compartment cover down off of the camera body.

    Edit

  2. Aiptek DZO-V58N Lens Protector Replacement: step 2, image 1 of 1

    • Pry up the battery from the bottom using a finger and remove the batter from the case.

    Edit

  3. Aiptek DZO-V58N Lens Protector Replacement, Lens Protector: step 3, image 1 of 1

    • Remove the lanyard by pulling the grey lace through the black string loop.

    • Pull black string loop through the silver bracket.

    Edit

  4. Aiptek DZO-V58N Lens Protector Replacement: step 4, image 1 of 1

    • Use a plastic opening tool to pry off the black control cover.

    • The face plates are glued, so use force to pry the face plates from the camera body.

    Edit

  6. Aiptek DZO-V58N Lens Protector Replacement: step 5, image 1 of 1

    • Use a plastic opening tool to pry off the ridged back face plate and the black button.

    • The face plates are glued, so use force to pry the face plates from the camera body.

    • The button is loose and should come off with little or no effort.

    Edit

  7. Aiptek DZO-V58N Lens Protector Replacement: step 6, image 1 of 1

    • Use a plastic opening tool to pry off the silver face plate.

    • The face plates are glued, so use force to pry the face plates from the camera body.

    Edit

  8. Aiptek DZO-V58N Lens Protector Replacement: step 7, image 1 of 3 Aiptek DZO-V58N Lens Protector Replacement: step 7, image 2 of 3 Aiptek DZO-V58N Lens Protector Replacement: step 7, image 3 of 3

    • Open the USB cover to expose the small machine screw.

    • Use the Phillips #00 screwdriver to unscrew the six 0.5cm machine case screws (distributed around the camera body).

    • These small screws are easy to lose. Place the removed screws in an organized container to avoid losing them.

    Edit

  9. Aiptek DZO-V58N Lens Protector Replacement: step 8, image 1 of 1

    • Pull off the side control panel.

    Edit

  10. Aiptek DZO-V58N Lens Protector Replacement: step 9, image 1 of 2 Aiptek DZO-V58N Lens Protector Replacement: step 9, image 2 of 2

    • Flip open the screen by pulling the loose end of the screen away from the case.

    • Use tweezers to remove the two outside rubber dots to reveal the two 0.5cm machine screws.

    • Use the #00 Phillips Screwdriver to remove both screws.

    Edit

  11. Aiptek DZO-V58N Lens Protector Replacement: step 10, image 1 of 2 Aiptek DZO-V58N Lens Protector Replacement: step 10, image 2 of 2

    • Pull the body apart from the bottom of device just enough to make space to remove the silver plastic strap holder.

    • Use tweezers to remove the silver plastic strap holder.

    • Use a plastic opening tool to pry off the lens protector.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Zachary Yun

Member since: 04/03/12

7 Reputation

5 Guides authored

Badges: 4

+1 more badge

Team

Cal Poly, Team 5-5, Forte Spring 2012 Member of Cal Poly, Team 5-5, Forte Spring 2012

CPSU-FORTE-S12S5G5

5 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 554