Acer Iconia One 7 Battery Replacement

Introduction

The battery is essential to the Acer Iconia One 7 as it powers the entire device. One should be careful when replacing a battery because it may be dangerous if the battery is punctured. Taking apart the battery itself without proper safety precautions could prove to be hazardous to one’s health. Power down the device before beginning this repair.

What you need

Step 1 Battery

Acer Iconia One 7 Battery Replacement, Battery: step 1, image 1 of 1

Begin prying the front from the back on any side of the tablet. Gently work your way around the tablet with the prying tool.

Edit

Step 2

Using a plastic opening tool, separate the back cover from the main device.
Open each side continuously to ensure all sides have been separated.

Edit

Step 3

Turn the tablet over so the battery is facing up.

Edit

Step 4

Carefully pull back the black tape covering the battery lead connector.
Disconnect connection with the board by pulling up on the wire with the plastic opening tool.

Edit

Step 5

Acer Iconia One 7 Battery Replacement: step 5, image 3 of 3

Tool used on this step:

Plastic Cards

$2.99

Buy

Using a plastic card or opening pick, separate the battery from the rest of the device.
Do not use a metal spudger like seen in the example photos. Use a plastic card to avoid bending or rupturing the battery.