Acer Iconia B1-720 Battery Replacement

Step 1 Rear Case




• Insert a plastic opening tool into a gap near the charging port at the top of the device. Slide the tool in either direction along the device.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2




• Slide the tool along until you have completely separated the rear cover.
• If needed, place the first tool in the gap created to hold this gap open and use a second tool to pry the remaining portion of the rear cover off.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Once all the sides have been separated, you should be able to simply lift the cover off of the device.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4 Battery
• Peel back the plastic tape covering the battery connector.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Use the plastic opening tool to lift the battery off of the back panel. The adhesive used is strong so apply force during removal.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Lift the battery off of the panel gently. This will disconnect the battery connector from the motherboard.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Author

with 3 other contributors

Kervis Boston

Member since: 03/18/15

479 Reputation

3 Guides authored

Badges: 10

• 
• 
• 

+7 more badges

Team

Michigan Tech, Team 1-1, Lauer Spring 2015 Member of Michigan Tech, Team 1-1, Lauer Spring 2015

MTU-LAUER-S15S1G1

2 Members

5 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview