Acer Iconia B1-710 Tablet Camera Replacement

Introduction

This guide will provide a set of step-by-step instructions on how to remove and replace the camera on your Acer Iconia B1-710 tablet.

In the event that your camera scratches, breaks, or malfunctions, this guide can help assist you to remove and replace the camera on your Acer Iconia B1-710 tablet.

Be careful, this is a fragile device.

What you need

Step 1 Battery

Acer Iconia B1-710 Tablet Camera Replacement, Battery: step 1, image 1 of 3

Acer Iconia B1-710 Tablet Camera Replacement, Battery: step 1, image 2 of 3

Acer Iconia B1-710 Tablet Camera Replacement, Battery: step 1, image 3 of 3

Open the back cover by prying the casing off with an opening tool.
Be careful to not pull pieces apart aggressively. There is a wire that could break.

Edit

Step 2

Acer Iconia B1-710 Tablet Camera Replacement: step 2, image 3 of 3

Unplug the battery from the motherboard.

Edit

Step 3

Remove the battery.
The battery is lightly glued in, so there may be some difficulty getting it out.

Edit

Step 4 Camera

Acer Iconia B1-710 Tablet Camera Replacement, Camera: step 4, image 1 of 2

Acer Iconia B1-710 Tablet Camera Replacement, Camera: step 4, image 2 of 2

Remove the five 3mm Phillips #000 screws. The location of the screws are shown in the above picture, circled in red.
Keep the removed screws in a safe place so they can be used later.

Edit

Step 5

Unplug the LCD by lifting the LCD plug from the white board. The location of the LCD plug is shown in the above picture, circled in red.
If you are having difficulty removing the LCD plug, use a spudger to gently lift it.

Edit

Step 6

Next, unplug the orange strip from the motherboard by gently lifting it. The location of the orange strip is shown in the above picture, circled in red.
The orange strip is delicate; be careful when unplugging it and make sure it doesn't tear.

Edit