Introduction

Acer Aspire - V5-572, V5-572G

We will show you how to open the Laptop and install a new RAM Module.


Please SUBSCRIBE to my channel ツ

Video Overview

Switch-off the Laptop. Remove 17x Philips screws.
  • Switch-off the Laptop.

  • Remove 17x Philips screws.

Add Comment

Start opening from the SD Memory Card hole Use plastic tools to avoid damaging the cover. Use plastic tools to avoid damaging the cover.
  • Start opening from the SD Memory Card hole

  • Use plastic tools to avoid damaging the cover.

Love the tutorial man...but this is the most moronic thing I've ever seen...you can take batery out of laptop 15 years old in a flash, while here you have to disassemble the whole %#*@ laptop...only idiots can come up with something like that

razbojnikkuro - Reply

Before doing anything, disconnect the battery.

Add Comment

This model have 1x Memory Slot. You can upgrade your laptop with SODIMM DDR3 ram at 1333 or 1600. .

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

ZFix

Member since: 12/09/2013

131,986 Reputation

387 Guides authored

Team

Master Techs Member of Master Techs

Community

266 Members

634 Guides authored

One Comment

Hi,

While adding an extra RAM to the module in Aspire V5-472, I forgot to disconnnect the battery first.

I first tried 4 GB RAM compatible, SODIMMM- DDR3L 204-Pin Laptop Memory, Low Voltage. When that didn't work, I checked again.

Next time I disconnected the battery, and repeated the process with 2 GB RAM, compatible, SODIMMM- DDR3L 204-Pin Laptop Memory, Low Voltage. The RAM was still not discovered. None of the RAMs were detected.

Hope I haven't fried the RAM Module itself.

Please help.

Indi Shukla - Reply

Add Comment

View Statistics:

Past 24 Hours: 15

Past 7 Days: 67

Past 30 Days: 224

All Time: 10,255