1. Remove the adhesive that covers 2 screws. Remove the screws that connect the front frame from the back shell
    • Remove the adhesive that covers 2 screws.

    • Remove the screws that connect the front frame from the back shell

  2. Remove the battery
    • Remove the battery

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. With a thin tool like a Jimmy or an opening pick, unhook the front bezel from the back shell along the perimeter. It is joined by pressure hooks that release upon touch. Remove the bezel Remove the bezel
    • With a thin tool like a Jimmy or an opening pick, unhook the front bezel from the back shell along the perimeter. It is joined by pressure hooks that release upon touch.

    • Remove the bezel

  5. Remove the 4 screws that secure the LCD panel from the rear casing Place the LCD on the keyboard, minding any of the cables that may still be connected Disconnect all of the cables and remove the LCD
    • Remove the 4 screws that secure the LCD panel from the rear casing

    • Place the LCD on the keyboard, minding any of the cables that may still be connected

    • Disconnect all of the cables and remove the LCD

Conclusion

To re-assemble your device, follow these steps in reverse order.

Special thanks to these translators:

100%

Aaron Cooke is helping us fix the world! Want to contribute?
Start translating ›

Smilzo

Member since: 11/09/2013

5,459 Reputation

28 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 30