1. Place the computer face down on a flat surface.
    • Place the computer face down on a flat surface.

  2. Unscrew the smallest panel using a Philips PH1 screwdriver in a counterclockwise motion.
    • Unscrew the smallest panel using a Philips PH1 screwdriver in a counterclockwise motion.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Open the panel by lifting up in the small groove using a finger, Plastic Opening Tool or similar device.
    • Open the panel by lifting up in the small groove using a finger, Plastic Opening Tool or similar device.

  5. Slide the 3G card forward until it is not connected.
    • Slide the 3G card forward until it is not connected.

  6. Remove the 3G Card from the compartment.
    • Remove the 3G Card from the compartment.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Donny McKay

Member since: 11/03/2016

446 Reputation

4 Guides authored

Team

Baylor, Team 5-11, Williams Fall 2016 Member of Baylor, Team 5-11, Williams Fall 2016

BU-WILLIAMS-F16S5G11

3 Members

7 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 7

All Time: 214