Skip to main content
  1. Flip computer over, being sure the device is unplugged, powered off, and battery removed.
    • Flip computer over, being sure the device is unplugged, powered off, and battery removed.

    • Then, locate two screws for hard drive.

  2. Next, loosen both screws and remove plastic door.
    • Next, loosen both screws and remove plastic door.

  3. Grasp translucent plastic tab and pull to the side so hard drive comes free of SATA connectors
    • Grasp translucent plastic tab and pull to the side so hard drive comes free of SATA connectors

  4. Remove hard drive from computer and loosen 4 screws that hold it into it's metal housing.
    • Remove hard drive from computer and loosen 4 screws that hold it into it's metal housing.

    • Buy yourself a larger and/or faster 2.5in hard drive.

    • Redo the steps in reverse to reassemble the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 other people completed this guide.

Dante Bertana

Member since: 05/08/2010

702 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 30

All Time: 17,292