Introduction
In this guide, you will remove the USB Port from the device by removing two screws and disconnecting the ribbon cable connecting it to the motherboard.
What you need
-
-
Remove eleven 4 mm Phillips #1 screws
-
Pull the backplate off using your fingers.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team S6-G3, Thomas Fall 2017 Member of University of North Texas, Team S6-G3, Thomas Fall 2017
UNT-THOMAS-F17S6G3
3 Members
4 Guides authored
