Introduction

If the life of your battery is significantly shortened, it may be damaged or old. This guide can help you replace the battery by yourself!

Power the laptop off. Flip the laptop over and position it so the opening faces you. Remove the rubber foot located near the opening side of the device using tweezers.
  • Power the laptop off.

  • Flip the laptop over and position it so the opening faces you.

  • Remove the rubber foot located near the opening side of the device using tweezers.

Add Comment

Unscrew the five 5-mm screws using the PH0 screwdriver. Unscrew the five 5-mm screws using the PH0 screwdriver.
  • Unscrew the five 5-mm screws using the PH0 screwdriver.

Add Comment

Identify the HDMI port located in the side of the laptop opposite to the power button. Insert the plastic opening tool into the divet of the back panel located above the HDMI port. Pry along the laptop frame until the back panel comes loose.
  • Identify the HDMI port located in the side of the laptop opposite to the power button.

  • Insert the plastic opening tool into the divet of the back panel located above the HDMI port.

  • Pry along the laptop frame until the back panel comes loose.

  • Do not pull the back panel too hard as the battery is still connected to the back panel and the motherboard. This can damage your device.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Rotate the device so the opening faces you again. Hold the back panel away from the laptop and  remove the 4-mm screw using the PH0 screwdriver.
  • Rotate the device so the opening faces you again.

  • Hold the back panel away from the laptop and remove the 4-mm screw using the PH0 screwdriver.

    • This screw is fastening the battery to the laptop.

  • Lift the back panel gently.

Add Comment

Unplug the cable that connects the battery to the motherboard. Detach the back panel, which still includes  the battery.
  • Unplug the cable that connects the battery to the motherboard.

  • Detach the back panel, which still includes the battery.

Add Comment

Flip the back panel so the battery faces down. Remove the rubber foot with tweezers.
  • Flip the back panel so the battery faces down.

  • Remove the rubber foot with tweezers.

Add Comment

Remove the 5-mm screw that is located underneath the rubber foot using the PH0 screwdriver. Lift the battery and detach it from the back panel.
  • Remove the 5-mm screw that is located underneath the rubber foot using the PH0 screwdriver.

  • Lift the battery and detach it from the back panel.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Luz Villegas

Member since: 09/08/2017

428 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 20

Past 30 Days: 71

All Time: 313