Introduction

The hard drive is a relatively easy component to replace. That being said, you do have to be careful when removing it to not damage the connector.

Parts

No parts required.

  1. Unscrew the 13 6.2mm screws located on the bottom of the laptop using the JIS #0 screwdriver. Unscrew the 13 6.2mm screws located on the bottom of the laptop using the JIS #0 screwdriver.
    • Unscrew the 13 6.2mm screws located on the bottom of the laptop using the JIS #0 screwdriver.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Using a plastic opening tool, gently pry the lower case off. Place aside. Using a plastic opening tool, gently pry the lower case off. Place aside. Using a plastic opening tool, gently pry the lower case off. Place aside.
    • Using a plastic opening tool, gently pry the lower case off. Place aside.

  4. Locate the hard drive and slide the hard drive to the left until it disconnects from the mother board. Locate the hard drive and slide the hard drive to the left until it disconnects from the mother board. Locate the hard drive and slide the hard drive to the left until it disconnects from the mother board.
    • Locate the hard drive and slide the hard drive to the left until it disconnects from the mother board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Mason Devinney

Member since: 09/25/2017

346 Reputation

3 Guides authored

Team

USF Tampa, Team S3-G1, Cannon Fall 2017 Member of USF Tampa, Team S3-G1, Cannon Fall 2017

USFT-CANNON-F17S3G1

4 Members

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 33

All Time: 442