Image 1/1:
  • To release the battery, depress the battery release with a nylon spudger. Hold the latch down and slide it over.

Add Comment

Image 1/1:
  • Firmly grab hold of the battery and slide it out of the laptop.

Add Comment

Image 1/3: Remove the two M2.5x8 screws highlighted in the picture with a PH0 Phillips screwdriver. Image 2/3: Remove the two M2.5x8 screws highlighted in the picture with a PH0 Phillips screwdriver. Image 3/3: Remove the two M2.5x8 screws highlighted in the picture with a PH0 Phillips screwdriver.
  • Remove the plastic screw covers located near the laptop's hinge using a metal spudger.

  • Remove the two M2.5x8 screws highlighted in the picture with a PH0 Phillips screwdriver.

Add Comment

Image 1/3: Use a plastic opening tool to separate the the touchscreen from the back cover. Image 2/3: Carefully work your way around the frame and gently pry. Be careful not to brake the frame or damage the screen. Image 3/3: Carefully work your way around the frame and gently pry. Be careful not to brake the frame or damage the screen.
  • Flip the laptop over and open it up so the screen is facing up and the top of the screen is facing you.

  • Use a plastic opening tool to separate the the touchscreen from the back cover.

  • Carefully work your way around the frame and gently pry. Be careful not to brake the frame or damage the screen.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Disconnect the display cable by first taking off the tape using a metal spudger and then pulling on the black tab.

Add Comment

Image 1/2: Image 2/2:
  • Take off the yellow tape connecting the display to the border.

Add Comment

Image 1/2: Pry out the camera by lifting the adhesive with the metal spudger. Then, remove the camera by lifting it up by one side. Image 2/2: Pry out the camera by lifting the adhesive with the metal spudger. Then, remove the camera by lifting it up by one side.
  • Pull back the adhesive using the metal spudger.

  • Pry out the camera by lifting the adhesive with the metal spudger. Then, remove the camera by lifting it up by one side.

Add Comment

Image 1/1:
  • Remove the two brackets holding the displays by unscrewing both M1 .6x3 screws with a PH0 Phillips screwdriver.

Add Comment

Image 1/1:
  • Release the display from the border using your hands.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Caleb lindsay

Member since: 04/11/2016

670 Reputation

6 Guides authored

Team

Cal Poly, Team 34-15, Maness Spring 2016 Member of Cal Poly, Team 34-15, Maness Spring 2016

CPSU-MANESS-S16S34G15

4 Members

6 Guides authored

One Comment

the touchscreen its glue together with the LCD?

chrisfoliaki - Reply

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 11

Past 30 Days: 37

All Time: 485