Skip to main content

Introduction

Is your computer not connecting to the Wi-Fi? Consider using this guide to replace the wireless card in your device.

  1. Begin by unscrewing the four phillips #0 7.5mm screws on the plate on the underside. Remove the plate by lifting up. Begin by unscrewing the four phillips #0 7.5mm screws on the plate on the underside. Remove the plate by lifting up.
    • Begin by unscrewing the four phillips #0 7.5mm screws on the plate on the underside. Remove the plate by lifting up.

  2. Unscrew the one phillips #0 4.0mm screw at the top of the card in order for it to be removed. After the screw is removed, slide the card out. Remove connections to the terminals by pulling up on the connection carefully. After the screw is removed, slide the card out. Remove connections to the terminals by pulling up on the connection carefully.
    • Unscrew the one phillips #0 4.0mm screw at the top of the card in order for it to be removed.

    • After the screw is removed, slide the card out. Remove connections to the terminals by pulling up on the connection carefully.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Philip Matena

Member since: 10/23/2018

95 Reputation

1 Guide authored

Team

UC Davis, Team S11-G4, Lore Fall 2018 Member of UC Davis, Team S11-G4, Lore Fall 2018

UCD-LORE-F18S11G4

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 237