Introduction

Removing the back panel of the laptop expose the laptop to sensitive electronic components. Please be careful when you follow these procedures.

Parts

No parts required.

Image 1/1: If the battery is still connected to the laptop, remove the battery.
  • Unplug and power off the laptop.

    • If the battery is still connected to the laptop, remove the battery.

Add Comment

Image 1/1:
  • Flip over the laptop so that the back panel of the laptop is facing up.

Add Comment

Image 1/2: Only the four screws in the center are removable, the four along the edges are held in by rivets but can be loosened. Image 2/2: Only the four screws in the center are removable, the four along the edges are held in by rivets but can be loosened.
  • Use the Phillips #1 screwdriver to remove the eight 6.5 mm Phillips #1 screws.

    • Only the four screws in the center are removable, the four along the edges are held in by rivets but can be loosened.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Remove the back panel of the laptop.

Add Comment

Image 1/1: Ground the laptop to prevent static electricity from damaging the electrical components inside the laptop.
  • Connect a grounding cord to a metal interface on the laptop.

  • Ground the laptop to prevent static electricity from damaging the electrical components inside the laptop.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Pnithan Jantarakolica

Member since: 09/22/2016

1,039 Reputation

10 Guides authored

Team

UC Davis, Team 2-4, Oliver Fall 2016 Member of UC Davis, Team 2-4, Oliver Fall 2016

UCD-OLIVER-F16S2G4

5 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 82