Skip to main content

Parts

No parts specified.

  1. Start by unlocking the right locking latch. Then, by simultaneously unlocking the left latch, lift the battery out of its socket.
    • Start by unlocking the right locking latch.

    • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

  2. Begin by spotting the dummy memory card. Then, remove it and put it on your workplan.
    • Begin by spotting the dummy memory card.

    • Then, remove it and put it on your workplan.

  3. Locate the 15 screws that hold the bottom cover of the device in place. Unscrew them and place them on your work surface. Then, un-clip the bottom cover, starting with the side shown in the third picture.
    • Locate the 15 screws that hold the bottom cover of the device in place.

    • Unscrew them and place them on your work surface.

    • Then, un-clip the bottom cover, starting with the side shown in the third picture.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Special thanks to these translators:

fr en

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Felice Suglia

Member since: 06/15/2013

23,441 Reputation

195 Guides authored

2 Comments

J’ai effectivement pu démonter et remonter la base de l’ordinateur pour accéder au ventilateur, ceci en 15 minutes. Pour aller aussi vite, j’ai utilisé une visseuse - dé-visseuse.

J’ai eu des problèmes de surchauffe de l’ordinateur, il semble que le ventilateur ne refroidisse pas assez dans certaines circonstance, en particulier lors de réunion “google meet” avec plus d’une dizaine de participants et des partages d’écran. Ce problème, je n’ai pas réussi à le résoudre.

Mais l’ouverture et la fermeture de l’ordinateur est effectivement très simple, merci.

Bernard Gisin - Reply

Pour plus d’informations à ce sujet, voir https://swisslinux.org/forum/viewtopic.p....

Cordialement.

Felice Suglia - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 404