Introduction

This guide will show how to replace the speaker woofers on the AYL SoundFit. There is one on each side of the device. With just a screwdriver, the speaker woofers can be removed and replaced in a few simple steps.

Parts

No parts required.

  1. Remove each of the 4 screws on the front cover using the 2.5mm Hex Bit in the screwdriver.
    • Remove each of the 4 screws on the front cover using the 2.5mm Hex Bit in the screwdriver.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Remove the cover with a spudger.
    • Remove the cover with a spudger.

  4. Remove the inner panel using a spudger.
    • Remove the inner panel using a spudger.

    • During reassembly, place the new inner panel in the same position as the original panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Taylor Shuler

Member since: 02/16/2016

245 Reputation

2 Guides authored

Team

IUPUI, Team 3-3, Harley Spring 2016 Member of IUPUI, Team 3-3, Harley Spring 2016

IUPUI-HARLEY-S16S3G3

4 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 181