Fix Your Stuff Community Store

ATT Trimline 210M Back Cover Disassembly

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

The back cover is easily removed by inserting a Metal Spudger on the bottom of the phone. Be careful not to use too much force when attempting to open up the phone.

What you need

  1. ATT Trimline 210M Back Cover Disassembly, ATT Trimline 210M Back Cover Disassembly: step 1, image 1 of 1

    • Open up the phone with a metal spudger, sticking it in the bottom near the cord jack entry.

    • Be careful with the amount of force you use, or the plastic may crack.

    Edit

  2. ATT Trimline 210M Back Cover Disassembly: step 2, image 1 of 1

    • Pull up on the spudger while simultaneously pulling up the top shell of the phone.

    Edit

  4. ATT Trimline 210M Back Cover Disassembly: step 3, image 1 of 1

    • After unclipping the bottom half of the shell, pull upward from the position shown in the picture to detach the top half of the shell.

    • The cord connecting the speaker is short, and may detach if not done carefully.

    Edit

  5. ATT Trimline 210M Back Cover Disassembly: step 4, image 1 of 1

    • You will have the motherboard and speaker exposed to you.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Juan Carrillo

Member since: 02/10/16

406 Reputation

3 Guides authored

Badges: 8

+5 more badges

Team

USF Tampa, Team 4-2, Lacy Spring 2016 Member of USF Tampa, Team 4-2, Lacy Spring 2016

USFT-LACY-S16S4G2

4 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 18