Fix Your Stuff Community Store

ASUS ZenWatch Charging Cradle Circuit board Replacement

Introduction

Replacing the circuit in the charging cradle

What you need

  1. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: step 1, image 1 of 3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: step 1, image 2 of 3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: step 1, image 3 of 3

    • Using a metal spudger gently pry the plastic outer case apart

    • Pry open a little bit on each side before trying to open fully

    Edit

  3. ASUS ZenWatch Charging Cradle Circuit board Replacement: step 2, image 1 of 3 ASUS ZenWatch Charging Cradle Circuit board Replacement: step 2, image 2 of 3 ASUS ZenWatch Charging Cradle Circuit board Replacement: step 2, image 3 of 3

    • Use the PH0 sized Phillips screwdriver to remove the three screws (2mm) holding the board to the cradle.

    • Gently pry up with your hands to pull the board off.

    • Don't grab directly on the USB port as you may loosen or bust the connections.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Wayne McClure

Member since: 02/10/16

961 Reputation

5 Guides authored

Badges: 14

+11 more badges

Team

USF Tampa, Team 1-3, Sullivan Spring 2016 Member of USF Tampa, Team 1-3, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G3

4 Members

7 Guides authored

One Comment

If you had listed what components were on the board or at least taken a picture of the other side of the board, I might have given you some points.

Nate Fansler - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 2,832