Introduction

Hard drives are vital to a computer since it allows for information to be stored. If yours is not working properly, here is how it can be removed.

Parts

No parts required.

Place the laptop upside down so that the bottom panel is facing upwards.
  • Place the laptop upside down so that the bottom panel is facing upwards.

Add Comment

Unscrew the following 10 screws
  • Unscrew the following 10 screws

    • Eight 5 mm Phillips head screws

    • Two 10 mm Phillips head screws

Add Comment

Carefully peel the panel off of the bottom of the laptop.
  • Carefully peel the panel off of the bottom of the laptop.

Add Comment

Remove the following 4 screws and piece of tape.
  • Remove the following 4 screws and piece of tape.

  • Three 3 mm Phillips head screws

  • One 5 mm Phillips head screws

Add Comment

Carefully disconnect the hard drive from its port by sliding it to right.
  • Carefully disconnect the hard drive from its port by sliding it to right.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Keith Rachels

Member since: 03/04/2016

568 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 28

All Time: 391