Skip to main content

Introduction

This guide will detail how to remove and replace the back case of the device. This will give you access to the inner parts of the laptop.

Parts

No parts specified.

  1. Turn the laptop off and unplug all cables. Flip over so the bottom is facing you.
    • Turn the laptop off and unplug all cables.

    • Flip over so the bottom is facing you.

    • Remove the ten 3mm Torx T5 screws from the bottom cover.

  2. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  3. Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open. Run the spudger along the perimeter of the bottom cover to remove.
    • Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open.

    • Run the spudger along the perimeter of the bottom cover to remove.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Steven Hahn

Member since: 01/29/2018

767 Reputation

6 Guides authored

Team

USF Tampa, Team S5-G1, Passmore Spring 2018 Member of USF Tampa, Team S5-G1, Passmore Spring 2018

USFT-PASSMORE-S18S5G1

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 12

Past 30 Days: 34

All Time: 501