Step 1 Lower Case



• Use a Phillips #0 screwdriver to remove the eleven 6.9 mm screws that secure the lower case.
• Make sure all the screws on this side get taken out because there could be a label or warranty sticker covering up a screw that might be missed.
• Insert an opening pick into the gap between the lower case and chassis.
• Slide the pick around the entire perimeter of the laptop until the lower case fully releases.
• Remove the lower case.
Edit
1 comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-180425" src="https://www.ifixit.com/Guide/embed/180425/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-180425"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/180425" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview