Introduction

Use this guide to remove the audio speakers in your device.

Parts

No parts required.

Flip the Chromebook over so the bottom of the device is facing up.
  • Flip the Chromebook over so the bottom of the device is facing up.

Add Comment

Using the JIS-J0 Screwdriver, remove the following screws from the bottom: (5) Five 6mm screws
  • Using the JIS-J0 Screwdriver, remove the following screws from the bottom:

  • (5) Five 6mm screws

  • (6) Six 8mm screws

Add Comment

Gently wedge  the spudger in between the bottom of the device and the keyboard, and carefully pry the cover open.  Then, carefully  lift up on keyboard. Gently wedge  the spudger in between the bottom of the device and the keyboard, and carefully pry the cover open.  Then, carefully  lift up on keyboard. Gently wedge  the spudger in between the bottom of the device and the keyboard, and carefully pry the cover open.  Then, carefully  lift up on keyboard.
  • Gently wedge the spudger in between the bottom of the device and the keyboard, and carefully pry the cover open. Then, carefully lift up on keyboard.

Add Comment

Gently detach connecting cables Carefully flip up the large black tab. Carefully flip up the small white tab.
  • Gently detach connecting cables

  • Carefully flip up the large black tab.

  • Carefully flip up the small white tab.

  • Remove its corresponding black cable.

  • Remove the corresponding white cable.

  • The keyboard will be fully detached at this point.

Add Comment

Using the JIS-J0 screwdriver, unscrew and remove from the battery: (6) Six 6mm screws
  • Using the JIS-J0 screwdriver, unscrew and remove from the battery:

  • (6) Six 6mm screws

Add Comment

Using the plastic opening tool, gently push the connector tab away from the battery to detach the cable.
  • Using the plastic opening tool, gently push the connector tab away from the battery to detach the cable.

  • The battery will be fully detached at this point. Carefully lift it out of the device.

Add Comment

Using the plastic opening tool, disconnect the audio connector by pushing the audio tab toward the speakers. With the audio cable detached, carefully lift the speakers out of the device.
  • Using the plastic opening tool, disconnect the audio connector by pushing the audio tab toward the speakers.

  • With the audio cable detached, carefully lift the speakers out of the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gina Altimari

Member since: 09/28/2017

401 Reputation

4 Guides authored

Team

USF Tampa, Team S2-G5, Passmore Fall 2017 Member of USF Tampa, Team S2-G5, Passmore Fall 2017

USFT-PASSMORE-F17S2G5

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 43