What you need
-
-
Loosen the water and sewage hose
-
Remove screws securing the top cover
-
Lift the lid at the back and slide it out to the rear
-
-
-
Remove water hose
-
Disconnect the power plug
-
Remove plastic caps at the bottom right + left
-
-
-
-
Remove screws according to pictures (and only these !!!)
-
Remove rear housing part
-
-
-
The shock absorbers are situated to the right and to the left. The right one is extremely difficult to access.
-
To remove the pins, the lock must be pressed down at the front end.
-
The installation position is marked on the shock absorber.
-
Repeat the steps in reverse order to reassemble your device.
Repeat the steps in reverse order to reassemble your device.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›