4Sight 9 Battery Replacement

You're viewing a previously published version of this guide. View latest version

Jun 23, 2015 - 04:28:12

Jun 23, 2015 - 04:28:12 Jun 23, 2015 - 04:28:10 May 28, 2015 - 09:19:00 May 28, 2015 - 09:12:37 May 28, 2015 - 09:10:26 May 28, 2015 - 09:10:26 May 28, 2015 - 08:26:23 May 28, 2015 - 08:24:18 May 28, 2015 - 08:21:39 May 28, 2015 - 08:16:12 May 19, 2015 - 10:42:39 May 19, 2015 - 10:19:06 May 19, 2015 - 10:19:01 May 19, 2015 - 10:17:59 May 19, 2015 - 10:17:34 May 19, 2015 - 10:14:42 May 19, 2015 - 09:50:08 May 19, 2015 - 09:46:21 May 19, 2015 - 09:45:10 May 19, 2015 - 09:44:29 May 19, 2015 - 09:43:41 May 19, 2015 - 09:42:36 May 19, 2015 - 09:29:48 May 19, 2015 - 09:29:00 May 19, 2015 - 09:28:59 May 19, 2015 - 09:28:39 May 19, 2015 - 09:28:39 May 19, 2015 - 09:28:02 May 19, 2015 - 09:27:05 May 19, 2015 - 09:27:04 May 19, 2015 - 09:26:49 May 19, 2015 - 09:25:59 May 19, 2015 - 09:24:57 May 19, 2015 - 09:24:57 May 19, 2015 - 09:19:19

Newer

Introduction

Use this guide to replace the battery on the 4Sight 9

What you need

Step 1 Cover

4Sight 9 Battery Replacement, Cover: step 1, image 1 of 2

4Sight 9 Battery Replacement, Cover: step 1, image 2 of 2

Place the tablet on its side so that the two screws are facing upward.
Remove two 1 mm screws from the left side of the tablet using a Phillips #00 screwdriver.

Step 2

Pry the case away from the device slowly by sliding a plastic opening tool along the device.
Once loosened, use your hands to separate the case from the device.

Step 3

Hold the positive and negative wires as close as possible to the speaker.
Use an opening tool and fingers to simultaneously lift the speaker from the cover.

Step 4 Battery

4Sight 9 Battery Replacement, Battery: step 4, image 1 of 1

Use soldering gun to remove the positive and negative wires connecting the battery to the circuit board.
For a complete guide on how to solder, click here.

Step 5

Insert plastic prying tool under upper-hand corner of battery and slide back and forth.
Once loosened, insert plastic prying tool under lower-hand corner and repeat sliding action.
Repeat previous actions until battery comes loose from device.