32" Hisense LED TV Screen Replacement

Step 1 Screen



• DO NOT plug the TV into power at any time during this process.
• To begin, lay the TV screen-down on a smooth surface.
• Unscrew the screws connecting both support legs to the TV.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2



• To begin removing the back plate, find and remove all 18 screws indicated with the Phillips screwdriver.
• If the screws are difficult to find, remove any screws on the back plate that have an arrow pointing to them like in the second picture.
• Once all of the screws are removed, carefully pop off the back plate without damaging any of the connected wires.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Slide the power cord free from its metal framework.
• After the power cord has been moved, remove the four screws keeping the housing in place. Once finished, remove the housing as well.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Remove the three silver screws connecting the circuit board to the rest of the TV that are circled in the picture using the Phillips screwdriver.
• Remove the final silver screw, making sure to avoid disconnecting any of the wires that obscure it from view.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Remove all of the 18 screws connecting the front frame to the back of the TV with the Torx screwdriver.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Once the screws are all removed, slide the flat-head screwdriver into the small gap between the front and back plates. Use the screwdriver to pry the plates apart and lift the back plate up.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 7
• Completely separate the back from the front and flip the back section over so that the screen is now on top.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 8
• Find the cable pictured and detach the plastic film protecting the circuitry to which the cable is attached.
• DO NOT detach both ends of the plastic. Only detach the end that is easily removed from its adhesive.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 9
• After detaching the plastic, detach the wire connecting the screen to the rest of the TV.
• Next, the circuitry needs to be removed from the TV itself. Lift the screen circuitry free from the adhesive and then lift the screen free from the back section of the TV.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 10
• Now that the screen has been removed, take the new screen and attach its circuitry in the same place as the previous screen. After that, connect the cable from the rest of the TV to the screen's port and it should be good to go!
Edit
3 comments
Add a comment
Hi i need a screen replacement cos mine is broken how can i get it am at limpopo mokopane town
Kgabale Phillimon - Sep 7, 2021 Reply
Hi as i have sade i need hisense 32D screen replacement am at mokopane limpopo province how can I get it I sold apritiate if help
Kgabale Phillimon - Sep 7, 2021 Reply
I need hisense 32 inch led screen. How much an in Ebonyi state of Nigeria
Agbo Chidiebere O - Mar 19, 2022 Reply
Add Comment
1024
Cancel Post comment

Author

with 2 other contributors

Connor French

Member since: 09/29/15

1,340 Reputation

2 Guides authored

Badges: 8

• 
• 
• 

+5 more badges

Team

Cal Poly, Team 17-2, Green Fall 2015 Member of Cal Poly, Team 17-2, Green Fall 2015

CPSU-GREEN-F15S17G2

4 Members

8 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview