Introduction

This is a quick explanation on how to reconnect the door panel back to the door.

Insert the metal ball into the plastic door pull handle assembly. With the ball inserted, route the steel cable through the assembly and align the black plastic notch on the cable with the plastic notch on the door pull handle assembly. Press the cable notch into the door pull handle notch and snap it into place.
  • Insert the metal ball into the plastic door pull handle assembly.

  • With the ball inserted, route the steel cable through the assembly and align the black plastic notch on the cable with the plastic notch on the door pull handle assembly.

  • Press the cable notch into the door pull handle notch and snap it into place.

Add Comment

Hold the door lock in the "unlocked" position with your thumb. This will make it easier to insert the metal ball into the door lock assembly.
  • Hold the door lock in the "unlocked" position with your thumb. This will make it easier to insert the metal ball into the door lock assembly.

Add Comment

Insert the metal ball into the plastic door lock assembly. With the ball inserted, route the steel cable through the assembly and align the blue plastic notch on the cable with the plastic notch on the door lock assembly.
  • Insert the metal ball into the plastic door lock assembly.

  • With the ball inserted, route the steel cable through the assembly and align the blue plastic notch on the cable with the plastic notch on the door lock assembly.

  • Press the cable notch into the door lock notch and snap it into place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 409