Fix Your Stuff Community Store

1992-1996 Ford F series-Bronco Header Panel Replacement

Introduction

In this guide, you will need very few tools to replace your header panel. This is a fast, and safe way to replace your header panel. Out of caution, before completing make sure your vehicle is shut off, and your emergency break is applied.

What you need

  1. 1992-1996 Ford F series-Bronco Header Panel Replacement, Header Panel: step 1, image 1 of 1

    • Remove the 5 screws with the screwdriver to remove the grill.

    Edit

  2. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 2, image 1 of 1

    • Set aside the windshield fluid/coolant reservoir by removing the 11mm bolt.

    Edit

  3. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 3, image 1 of 1

    • Remove the two screws on top of the headlight bezel, and the two 11mm bolts on the back of the bezel.

    • Then, remove the bolts from the housing. Repeat this step for the other headlight.

    Edit

  4. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 4, image 1 of 1

    • Remove the bolts retaining the header panel using the 8mm socket and ratchet.

    Edit

  6. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 5, image 1 of 1

    • Remove the headlight bulbs from the headlight housing by turning them counterclockwise on the retaining clip.

    Edit

  7. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 6, image 1 of 1

    • Remove the old header panel, and install the replacement panel.

    Edit

  8. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 7, image 1 of 1

    • Replace all of the bolts that retain the header panel.

    Edit

  9. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 8, image 1 of 1

    • Reinstall the headlight bulbs by turning clockwise on the retaining clip.

    Edit

  10. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 9, image 1 of 1

    • Reinstall the headlight bezels after reinserting the marker lights with the two screws, and two 11mm bolts.

    Edit

  11. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 10, image 1 of 1

    • Reinstall the windshield fluid/coolant reservoir with the 11mm bolt.

    Edit

  12. 1992-1996 Ford F series-Bronco Header Panel Replacement: step 11, image 1 of 1

    • Reinstall the grill with the 5 screws.

    Edit
Finish Line

One other person completed this guide.

One Comment

My header panel was broke. Into like 5 pieces. I had everything pulled off my front end before realizing that I had not mapped out my process. This really helped me put it all back together.

I would love a parts source guide for all of the clips, fasteners and screws for all of this as some of mine were beyond reuse.

Brandon Sewall - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 11

All Time: 1,368