Skip to main content

三星Galaxy Note 4屏幕组件的更换

What you need

Video Overview

  1. 三星Galaxy Note 4屏幕组件的更换, 屏幕组件: step 1, image 1 of 1
    • 注意:建议取出电池,S Pen,SD卡和SIM卡(如果您的手机使用SIM卡的话)。

    • 从加热屏幕的边缘开始。 Galaxy Note 4上的胶粘剂比新一代的胶粘剂更薄,更容易软化,只需用很少的热量和一点撬动。

  2. 三星Galaxy Note 4屏幕组件的更换: step 2, image 1 of 1
    • 用撬棒工具慢慢沿着屏幕边缘划开。

    • 要非常小心地绕着设备的顶部和侧面靠近手机底部的粘合胶。 Galaxy Note 4的触摸感应板挡在那里,你的撬棒很容易切断它们。

  3. 三星Galaxy Note 4屏幕组件的更换: step 3, image 1 of 1
    • 将Jimmy撬刀插入液晶显示屏下方来划开中间的粘合剂。粘合剂很牢固,所以在分离前确保插到铜绝缘层的下面。

  4. 三星Galaxy Note 4屏幕组件的更换: step 4, image 1 of 3 三星Galaxy Note 4屏幕组件的更换: step 4, image 2 of 3 三星Galaxy Note 4屏幕组件的更换: step 4, image 3 of 3
    • 注意事项1:粘合剂在图中红线区域。

    • 注意事项2:如果从右侧插入撬片,请确保工具插入长度在2.2cm以内,​​避免损坏Home键。

    • 注意事项3:如果从左侧插入撬片,由于相同的原因,请确保插入长度在4.4cm以内。

  5. 三星Galaxy Note 4屏幕组件的更换: step 5, image 1 of 2 三星Galaxy Note 4屏幕组件的更换: step 5, image 2 of 2
    • 注意事项4:注意液晶屏弯曲部分。当您划开粘合剂时,请单独留下顶部粘合剂,以免损坏柔性线缆。但如果屏幕已经坏了,你就不必担心这么多了。

    • 请注意底部的虚拟按键。

    • 如果安装新液晶显示屏时红线区域中的粘合剂不再粘和,可以选择使用3M双面胶带。它可以紧固地粘和新屏幕与LCD屏幕贴纸。

  6. 三星Galaxy Note 4屏幕组件的更换: step 6, image 1 of 1
    • 翘起S Pen触摸传感器连接器和液晶显示屏屏连接器。

  7. 三星Galaxy Note 4屏幕组件的更换: step 7, image 1 of 1
    • 最后把液晶显示屏和设备外框分离。

Conclusion

要重新组装您的设备,请倒序执行这些步骤。

159 other people completed this guide.

Special thanks to these translators:

en zh

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Sophia

Member since: 03/25/14

43,810 Reputation

62 Guides authored

42 Comments

Can I use a hair dryer instead of a heat gun

charlie - Reply

Yes, a hair dryer on the hot setting will work in place of a heat gun for this repair. You may have to heat it a bit longer but you will be able to tell when the adhesive is warm enough, as it will begin to separate a lot easier.

Brad -

Here in our tech community we have been discussing the foil under the LCD. We are doing more testing but there might be a connection with the foil functioning in conjunction with S-Pen and AirView. Can anyone confirm this?

Kevin Henson - Reply

Yes, the foil permits the s pen to function. If you have the part of the foil that was riped off you can tape it back.

Gianrene Padilla -

the foil itself has nothing to do with the functioning of the spen. It is for heat dissipation

Mentat Solutions -

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 21

Past 30 Days: 74

All Time: 317,473