Green Series Portable Headlight System 46070, 46072, 46074, 46076 46070R, 46072R, 46074R, 46076R Directions for use

Material No. 718899 Rev. A ©2014

Green Series Portable Headlight System

46070, 46072, 46074, 46076 46070R, 46072R, 46074R, 46076R Directions for use

Symbol descriptions

Consult Directions for use

IPXØ

Warning

Caution

Class II Equipment

INTENSE LIGHT

Lamp On

Lamp Off

Recycle the product separate from other disposables, see 'Product Disposal'

Not protected against the ingress of water.

WARNING :

• ·Green Series Portable Headlight is not suitable for use in the presence of a flammable anesthetic mixture with air or oxygen or nitrous oxide. An explosion may result.
• INTENSE LIGHT: Lamp is bright. Do not stare at the lamp when in use. May be harmful to eyes.

CAUTION:

• Read Operating Manual for Warnings, Cautions, and Instructions for Use.
• No modification of this equipment is allowed.
• Do not block access to the wall socket. Ensure that transformer can be unplugged from the AC power source.
• Use only Green Series Portable Headlight Power Source/ Battery Charger and rechargeable battery pack supplied by Welch Allyn.
• There are no user-serviceable parts inside the device except the rechargeable batteries and headband. Contact the Authorized Service Center listed at www.welchallyn.com/ support for further assistance.

Guidelines for safe use of the Green Series Portable Headlight

Intended use

This headlight is designed to meet the various needs of the physician's office, hospital environment, and specialist's office.

Setup and operation

The Green Series Portable Headlight (REF 46070) consists of the Portable Headlight (REF 46000) with Direct Power Source (REF 74170).

The Green Series Portable Headlight is designed to operate off the battery or direct power source. To operate the headlight using the direct power source, follow the instructions and illustrations in the section labeled Direct Plug-In Transformer. Press the on/off switch located on the Direct Plug to operate the headlight.

To adjust the light spot size, turn the knob on the front section of the luminaire. To adjust the rigid headband, simply rotate the adjustment knob located on the back of the headband.

Follow the assembly instructions listed below and the corresponding illustrations.

Direct Plug-In Transformer / Charger

Plug Power cord into the port on the top of the luminaire. Push until firmly in place.

The instrument is now ready for use.

Plug direct power source into a nearby receptacle.

Battery Replacement

Drop the battery pack into the luminaire visor and plug into the connector

Headband Replacement

On/Off Switch

Holding the luminaire with the on/off switch in the up position, place the openings located in the front section of

visor section of the luminaire into the the terry cloth headband.

Cleaning (Recommended monthly)

CAUTION:

• Do not immerse in cleaning solutions.
• Excess solution entering the luminaire assembly could damage internal components. Use caution to ensure cloth is not saturated with solution.
• Do not sterilize the unit.

1. Unplug the unit prior to cleaning.
2. Wipe down the entire luminaire with a cloth slightly dampened with a mild solution of detergent.
3. Do not operate the light until the light is thoroughly dry.

Troubleshooting

Table Caption: This table outlines troubleshooting steps for a device experiencing light output issues, detailing potential causes and corresponding corrective actions for problems such as no light output and low light output.

Specifications

Color Temperature:

5300K

Light Intensity:

40 Lumens

Working Distance:

16 Inches

Electrical

**Table Caption: This table lists four reference models (46070(R), 46072(R), 46074(R), and 46076(R)) with their respective input