Skip to main content

The PlayStation 3 (or commonly known as the PS3) is the third home computer entertainment system produced by Sony Computer Entertainment, and the successor to the PlayStation 2. It was released November 11, 2006

781 Questions View all

PS3 YLOD, tried to reflow before I started noticed blow resistor

I was trying to reflow my PS3 due to the YLOD issues all too common anymore. When I got the unit apart noticed that there is a blow resistor by the tell tale black mark on the board in photos. This part has a 2 on it and I am looking to try to replace this part however I have no idea what size I need or the best place to get one.

Has anyone else had this same problem. I'm assuming this resistor (if it truely is a resistor) is used as a fuse.

Any help would be appreciated. The part in question is on the top portion of the motherboard near the HDMI port (closest port on the side in the photo).

Also around the bad part is COK-002 TH2501 marked on the board.

Block Image

Block Image

Thanks in advance for any help.

Answer this question I have this problem too

Is this a good question?

Score 2
1 Comment

This question was migrated from http://meta.ifixit.com/Answers.

by

Add a comment

1 Answer

Most Helpful Answer

Shawn, your original question was moved to the "Answers" section, and it was answered:) Check on here Noticed blown resistor, what size resistor do I need?

Seems like we are not really connecting here :) Here is the answer, just like the above link"

That is a thermistor :"TH2501 part number:1-805-726-11 description THERMISTOR, POSITIVE You can try and do more of a parts search by that number. I just did a quick one and got this. Hope this helps, good luck.

Was this answer helpful?

Score 1

1 Comment:

Thanks. Though I somehow deleted my original question.

by

Add a comment

Add your answer

Shawn will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 2,099