Skip to main content

Free Shipping on Domestic Orders $75+

The Nintendo 3DS XL 2015, marketed as the New Nintendo 3DS XL, was released October 11, 2014 in Japan and February 13, 2015 in North America.

Please help me find why my motherboard is dead!?

Help with this new 3ds xl motherboard, I bought this console that seems DEAD, I took out the ABXY daughter board and put it in another console and it worked fine, so the issue it's in the motherboard but I don't know where? I checked the fuse under the charge connector and it took a couple of seconds but it beep, also checked some pins in the square black chips and some beep some stayed in 1, idk if im doing things right please help!!

I suspect the issue is in the conector for the powerboard but i'm not sure. I have another motherboard to compare this dead one btw

Also charging seems fine, the charge led doesnt turn off with the battery on.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

Hi!

So, I assume that the New 3DS XL won’t boot at all??

You already tried to replace the power board, correct? Did you also replaced the cable? Otherwise I would do that first.

If yes, check the motherboard for shorts.

What happens if you try the other motherboard, does that one work?

Thanks!

Was this answer helpful?

Score 2

4 Comments:

Hiiii yes no blue light at all! and when trying the daughter board on other consoles it Works (same with it's ribbon cable) I swapped around stuff between the two consoles and the issue it's always this motherboard, the f1 and f2 fuses in this console seems fine they have continuity.

by

Hi!

Okay. In this case, check the motherboard for shorts and see if you can find anything. Could also be CPU related... In this case, I would replace the board...

by

I cant replace the board! Please what do you mean cpu related? It needs rebailing or replacement? And where or what do i look for shorts? The capacitors?

by

Then it does need to be replaced (CPU). But first check for shorts around the whole board. Example: https://youtu.be/pI_YlapEfT0?is=y9LfIUob...

It’s also a good thing to check the capacitors for physical damage AND to test them :)!

by

Add a comment

Add your answer

AA aA will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 52

All Time: 63