What is wrong with my Kenmore Elite HE3 washer. There is loud clicking at start of machine at times and today, would not start at all--had FL error.
Is this a good question?
Rep: 782.1k
1.1k
893
2.3k
PFS, I checked through the service manual but can not find any FL error (possible that it is FdL?). I would start off by trying to reset the washer. check this copy from a different answer "If there are no error codes being generated, this could have just been a momentary glitch. If you see "Fdl" or "Fdu" error codes, these are usually indications of a failed door latch assembly and will require replacement. You can also try to reset the CCU by unplugging the washer for AT LEAST 30 minutes." you can download a service manual from here" Hope this helps, good luck.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 498
