bottom half of touch screen not working after replacement
swapped out the digitizer and now the bottom icons do not work
Is this a good question?
Score
-1
95993
2 Answers
Most Helpful Answer
Rep: 361
5
1
1
It sounds like either a faulty digitizer or maybe something might have gotten unplugged when you put it back together. I would try to pull it back apart and make sure that everything is connected properly and if you still have an issue, then I would say that it is a faulty digitizer.
Was this answer helpful?
Score
1
Rep: 1.1k
6
1
1
Do as Michael Stoffer writes, but also make sure contacts are clean and nothing is in the connector port.
Was this answer helpful?
Score
1
