Skip to main content

Model No. A1367 / 8, 16, 32, or 64 GB capacity

1303 Questions View all
Question Closed

White Rubber Part with Wifi Flex Cable Required?

So I took a part an iPod Touch 4th gen and miss-placed the white rubber part (located in the top left corner) where the Wifi Flex cable is located.

Is this part required still for a functional iPod touch? I do still have the Wifi Flex cable. Just wanted to make sure with the community before giving it back to my friend. Thank you.

http://guide-images.ifixit.net/igi/xHWqj...

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

I took one of these apart yesterday and found no white rubber as such but did slice through the bit of foam underneath it. It shouldn't case any problems at all, the rubber would be there to support it nicely to the iPod to make sure it is in position. If you want to, try cutting an elastic band into shape and putting it in, maybe even some clay - but, it is up to you whether or not you have stuck the front panel on again.

Hope this helps!

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 267