Bush Radio powers on with new power supply but wont tune.
Bush radio original power supply is 5.9v the lead became dodgy so I bought a third party replacement, sold as suitable for the model of radio. Replacement power supply is 6v. The radio powers on and the clock and tuner displays on the colour screen on the radio work properly, but the radio says that every station is 'not available' . Swap back to the old power supply, which isn't suitable long term because of the dodgy lead, and the radio works perfectly. The only other difference is that the old power supply has a large interference surpressor on the cord which the new one doesn't have - or if it does have it - it is in a much smaller fitting nearer the output plug. What could be causing this behaviour Any solutions?
Is this a good question?