“As soon as I start using my Usha Janome machine, the thread gets tangled on the fabric and the stitching doesn’t happen. I have to cut the thread again and again.”
Is this a good question?
Rep: 13
1
There is a possibility that you are not threading your thread correctly, on the top thread make sure you are threading it through the 2 metal hooks above the needle (follow the arrows).
Maybe the thread below is not coming from under your machine, or n that case i suggest you follow this instructions: https://youtube.com/shorts/IEqKie9zwOI?i...
Hope it helps
Was this answer helpful?
Past 24 Hours: 2
Past 7 Days: 8
Past 30 Days: 22
All Time: 112
