MacBook Pro 15" Unibody Late 2008 and...

Released October 2008 / 2.4, 2.53, 2.66, 2.8 or 2.93 GHz Core 2 Duo Processor

321 Questions View all

Screen Cover ( i.e bit with Apple Logo ) Seperating from LCD

Hello,

I cant find any guide to assembly of the LCD part of the MacBook Pro. The 'top cover' of the LCD on mine was never perfectly straight and recently its popped off on one side. It looks like its just glued on when i push it down it looks pretty much normal.

Any ideas ?

Cheers Alex

Picture : http://img6.imageshack.us/img6/2408/img0...

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

If still under warranty I would take it in, else wise:

The glue used is heat activated. If it will go back together I would use some "C" clamps (Home Depot has some with rubber feet) and some adhesive: Fix-All Adhesive is a great all-purpose solvent glue and sealer. It seals and repairs almost any surface easily and quickly. http://www.supergluecorp.com/super-glue/... FixAll

Was this answer helpful?

Score 2

Comments:

Good answer. +1 Ralph

by rj713

Hi, No warranty i am afraid as i bought it just after it came out. I will give your idea a shot. I just wanted to see if this was the way it was orginally held together before ploughin ahead

by Alex

Add a comment

Add your answer

Alex will be eternally grateful.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 2,700