Skip to main content

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913 Questions View all
Question Closed

White Screen Of Death after replacement and restore

I replaced the screen on my ipod touch 4th gen and when I first connected (without sticking it to the case) it was fine but then when I stuck it to the case it only came up as a white screen of death. I then proceeded to restore it and I am still left with a white screen of death. At present I can swipe the screen and hear it unlocking so the digitizer is working okay but the lcd screen still stays white. Is the LCD screen broken?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

You may try to reboot the device, holding Home and Power until it reboots.

I usually get it working after reboot. Otherwise you´d want to open it and check the cables again.

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,247