A wide range of repair guides and support for the consumer-grade laptop computer line by Toshiba.

571 Questions View all

Does my laptop have programming in it that should not be there?

My L740 satellite pro had windows 7 installed when I got it,supposedly brand new.After my husband had it one night this screen comes up showing Insyde H20. Then went to a screen showing

Intel UNDI,PXE-2.0(build 083)

Copyright(C) 1997-2000 Intel Corporation

For AtherosFit PCIE Ethernet Controller v2.0.2.3(5/18/10)

Check cable connection!

PXE-M0F: Exiting Intel PXE ROM.

No bootable device--insert boot disk and press any key

I've run my backup disk.I've run restore disk. It always comes to this or boot manager.I've set the default in boot manager, tried other configurations..Atheros Boot agent stays dominate even after exiting with changes saved.By the way the boot manager screen reads InsydeH20 Setup Utility.This is my first computer. I don't have a clue as to what I'm doing..so PLEASE help me get my programming back?!

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

You need to press F12 during the boot process, before you get the "insert boot disk" screen. When the boot screen comes up, you need to select the option with "HDD" or "Disk Drive" in it. This will prompt you to boot from the actual hard drive, and therefore finding the boot menu.

If you should need to set up a primary boot device, you will need to edit the BIOS settings, which will require a computer-savy person.

Best of Luck,

Was this answer helpful?

Score 0
Add a comment

Add your answer

Vanessa velcro will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 402