Repair guides for displays (or monitors) for computers or other devices with video output.

109 Questions View all

Philips 200w LCD Monitor goes black after few mintues of usage

Screen powers up wihtou issue. Color is good. Picture is good. After 4 or 5 minutes the screen will go black. Power led is still green. I shut montior off for a couple minutes and then power back on. Color and picture again are good. After a few mintues screen goes black. I replaced two caps that appear to have been blown. Same symtoms are present. same time frame to blackness. What can I do to fix? Thanks!

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

Have you tried plugging it into a monitor to see if its just the screen messing up?

by

Add a comment

1 Answer

Chosen Solution

Might be more than just the TWO bad caps you replaced. I thought I could get away with just replacing a couple that I could see were bad on my westinghouse 19H210s model but turns out I have to invest in the whole repair kit (only 13 dollars, however) check ebay if there are repair kits made for your model.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Doug will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 943