Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3248 Questions View all

unknown part from iPhone 4 lcd glass replacement

I was taking the screen off my iphone 4, then a part falls out and I couldn't figure out where it goes.

Please view the picture I link below.

The part on the left I'm more concern with.

The part on the right is a rubber tube, and I don't know where it comes from neither.

Please help. Thanks

iPhone 4 unknown parts

Answered! View the answer I have this problem too

Is this a good question?

Score 0


googled and got them figured out :D


Add a comment

2 Answers

Chosen Solution

The metal clip goes under the battery connector exactly as shown in your top photo. The battery screw goes through the hole. Place clip, snap battery connector down onto clip, replace battery screw.

The black rubber part sits on top left of Logic Board, it is a bumper, cushion for the two front screen flex cables. Therefore it is placed directly on the top left edge of Logic Board and under the two flex cables.

Was this answer helpful?

Score 0
Add a comment

thanks I appreciate it :)

Was this answer helpful?

Score 0
Add a comment

Add your answer

joeykcp will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 597