Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3200 Questions View all

Display corrupt after replacing top sensor cable and headphone jack.

My top mic/sensor stopped working so I ordered a replacement, fitted that then broke the headphone cable. I ordered that and replaced too but upon reassembly my display is corrupt, like mostly inverted smeared colours. I can make things out and everything else works except the display. The disassembly/reassembly process was a bit more involved than I originally anticipated so I'd like to know exactly where to look first if possible. Any ideas?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

just tore down the upper portion of the phone and remove the display jack from the logic board and put back in properly to check it working properly now or not .

Was this answer helpful?

Score 0
Add a comment

Add your answer

kez will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 539