Black screen after replacing the screen and volume flex cable

i just replaced the digitized and lcd and the volume flex cable and all i have is a black screen, i have checked the connections the device shows up on the computer and plays music when i plug in the control talk headphones and the new volume flex cable is working fine but i still can't see anything on the screen!

Answer this question I have this problem too

Is this a good question?

Score 0

2 Comments:

Bryan, something that is not yet clear to me but would help me in my further analysis: Are you able to switch it on via your power button (i.e. does the flex cable also work in regard to the power on/off function?)? Steffen

by

yeah it works i did a hard reboot i used reboot to put it in and out of recovery mode (read that would fix it somewhere else" the digitizer works because when i mirror my iPod screen through Xcode it shows me unlocking it and i can use the touch screen on the iPod its just a black LCD tough , when i plugged in the LCD it turned solid black and when i take it off it goes to that like grayish color, so the lcd is getting some sort of power/input

by

Add a comment