My blender keeps saying overload when it isn't?
For my smoothie, my blender says overload when it's the same amount as always. How come? Do I need to mail it in for repair?
Is this a good question?
For my smoothie, my blender says overload when it's the same amount as always. How come? Do I need to mail it in for repair?
Is this a good question?
Your machine has a three warranty, so if it's still covered I would contact Blendtec for warranty repair. Here's their website: http://www.blendtec.com/?gclid=CI-zi-_3r... or Contact
800-BLENDTEC
801-222-0888
Fax: 801-802-8584
M-F 8:00am to 5:30pm Mountain Standard Time
Was this answer helpful?
Hi, the problem is in the blenders rotor, it has a short and should be replaced.
Was this answer helpful?
I just had this Overload error start up this morning. Took it apart and recorded the repair:
Was this answer helpful?
No, You sir did NOT have "overload" error on the blender in that video.
Loose fan has nothing to do with the "overload" message, but the YouTube video you've made could help in selling your other blender on eBay, the one with burned motor and the "overload" message.
This is pathetic...
Overload 10892 = Replace the Carbon Brush of the engine
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 11,863