Fix Your Stuff Community Store

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Questions View all
Question Closed

Options

no sound control after reassembling

Hey,

i changed the display assembly of my iphone 4. Therefor i used your step by step instructions. But i forgot to activate the sleepbotton. I recognized it during the repairation and activated the sleepbotten then.

But after finishing the repairation the more-loudness control button is not working. When i push and hold the plus-button it even minimizes the loundness. But i can still change the loundness by displaymovements, while i´m listening to music.

I hope the there´s a solution for my problem and you can help me.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Did you follow this take apart guide?

I recommend verifying that the connector for the volume buttons is properly seated. That's the one highlighted in yellow on page 6, step 17.

Since the unit is largely functional now, I believe you didn't cause any damage by forgetting to power it down. Disconnecting the battery (step 5) took care of this for you! :-)

Was this answer helpful?

Yes No
Score 1

1 Comment:

Pretty good.

I did exactly what you told me. And it Works.

I try that before but i took off the wrong connector.

Thank you very much.

by

Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 464