Fix Your Stuff Community Store

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Questions View all

Options

Power button replacement not working

Hi,

I did already fixed some Iphones, but this time I have no clue whats wrong. I replaced the powerbutton from an 3GS, the silverbutton was gone...(but still working)...

So I replaced the button like explained in the guide, but the new button does not move up or down, it is just stuck. The guide says the metal handle has to face down, I did all that. I can use the screws again to fix it and all, still the button itself is not moving/working? Anyone got an idea? I guess I simply overlooked something.

Answer this question I have this problem too

Is this a good question?

Yes No
Score -1
1 Comment

Thanks for the tips and will try it out asap. :)

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

They can be quire fiddly to install, I have done many myself. Also bear in mind that the rear case might be too tight around the power button. I have had a few where I have had to use a small file and make the power button hole a little bigger for the button to move in and out.

Also sometimes if the screws are done up too tight it can stop the button from operating correctly.

Was this answer helpful?

Yes No
Score 1

1 Comment:

+..most times it's been overtight screws, they shouldn't be biting into the plastic but merely holding in place.

by

Add a comment

Add your answer

edwood110 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 613