My canon camera lense is stuck
My canon camera lense is stuck and it is not working
Is this a good question?
Score
0
765367
2 Answers
Chosen Solution
Rep: 551
12
3
2
If it is make a sound like " grgrgrgrgrgr", one of the gears are broken and if there is no sound, the motor or gear might be broken or something is stuck and not letting it move
Was this answer helpful?
Score
1
Yea mine did that and I broke two button board's or flex board and I bought a new on off ebay and my camera is not turning on so its the button bord or main board
Interesting....
Yea where can I buy parts from or test parts
Try on iFixit or Ebay (i never used any of these)
Yea I bought a flex borad off ebay and it didn't turn on the 180 and 160 so I don't know if it I fried the main board or if the flex board is broken but I bought a camera lens for the 180 cause that was the problem with it so I go to plug the lens in and it doesn't turn on I see that there are multiple scratches on the flex board so I bought a elph 160 and I scratced that one and I bought a new one off ebay and it didn't turn on so i don't know if it's the flex board or the main board where would I buy it off Ifixit ?
Rep: 782.3k
1.1k
893
2.3k
Devesh Semwal since this got converted from a comment to a question, we need to know your exact camera model. There are multiple reasons why a lens can be stuck. The mot common one is dirt between the barrels and a lens that has come of track. Start by following some of the suggestions made on here
Was this answer helpful?
Score
1
