Skip to main content

A compilation of guides for counter-top and handheld blender repair.

193 Questions View all

Why have blades in carafe stopped turning easily?

I have a K-TEC Champ HP3 blender. Counter shows I've used it 187 times. For some reason the blades in the carafe have become stiff and won't turn easily causing the motor to sound very high-pitched when I try to use it. It worked fine the last time I used it which was less than a month ago. Tried 3-in-1 oil and doesn't help. Any suggestions would be greatly appreciated!


Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

iPhone Battery Fix Kits

Only $29.99

Buy Now

iPhone Battery Fix Kits

Only $29.99

Buy Now

1 Answer

Chosen Solution

Sounds like the bearing has seized up. Oiling it may work but you risk contaminating your food! They are usually a sealed bearing packed with a food grade lubricant.

Washing the carafe in a dishwasher can exacerbate these types of failures due to the high temperatures and chemicals

You may need to replace the entire carafe if you cant get a new blade/bearing assy.

THIS MANUAL appears to be the same/similar device with a different name - Blendtec are a division of K-TEC. Section 7.3 says to contact customer support. Perhaps it is repairable??

Was this answer helpful?

Score 2
Add a comment

Add your answer

Carol will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,956