Fix Your Stuff Community Store

The Motorola Moto Z4 is from Motorola's Moto collection and has model numbers XT1980-3 and XT1980-4. It is also 5G capable.

28 Questions View all

Options

How do I replace LCD FPC connector (for screen) in Moto Z4?

I have replaced the screen in my Z4s a few times (I have more than one). However, this time the LCD FPC connector for the screen got chipped exposing the underlying pins. Neither the old cracked (but still working) screen nor new one will work now (no response - stays black). I can only guess the connector may be the problem. I have found it for sale at an online parts website, however, if it requires delicate soldering, I may not be capable of replacing it.

I have not located any help guides or other assistance to show how to replace it. I can manage it if it simply snaps into place. Anyone here have any suggestions or references where I may look for some guidance?

Many thanks in advance for help with this matter.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

you would need a soldering iron, hot air station and possibly a microscope for this job as thats the most common tools to do this repair. i would suggest taking it to someone that does microsoldering

Was this answer helpful?

Yes No
Score 2

1 Comment:

Yes, that's right. Upon closer inspection, I see it would be impossible for me to do. I'm just going to hang on to this Z4 for parts. Thank you for responding. Much appreciated.

by

Add a comment

Add your answer

Davis will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 5

Past 30 Days: 14

All Time: 172