Digitizer Replaced, Screen blinking
I replaced the digitizer and screen on my iPhone 4, it worked fine for 24 hours. Then the screen went blank, I could tell that the LCD was working, but no video. I took the phone apart to check all connections. Everything seemed fine, I reseated all the cables. Now it works, but blinks randomly. Any thoughts?
Is this a good question?
2 Comments
sounds like a loose connection..have you tried holding power and home for 10 sceonds, apple should appear and then release buttons?
by pollytintop
@pollytintop, I tried that with no luck. Thank for the tip.
by 215Solutions